Douglas Fir
Our Douglas Fir material comes from multiple sources, with various possible widths and thicknesses to allow for a wide range of applications. Our Rough-Sawn Douglas Fir is one of the most cost-effective and easiest ways to simulate barn-wood siding, while our Old Patina Douglas Fir is ideal for flooring, paneling, and trim.
| Mid-Grade | |
|---|---|
| Length | 2-12’ |
| Width | 3-1/8″ up to 9″ |
| Thickness | 3/8″ to 3/4″ |
| Source | Varied |
| Use | Siding and Paneling Only |
| Finish | Planed Old Patina Wire-Brushed, Old Patina Circle-Sawn, & Old Patina Rough-Sawn |
| FSC | 100% Certified |
| Material Specs | Nail marks with black staining are common, as are knots, checks, and small patches of discolored wood from rafters or studs. Bolt holes with black staining as well as indentations from use of tools are possible. Splits, wane, and knot holes may be present. Splits up to twice the finished width, knots up to a third of the finished width, and seasonal checking are allowed. |
| High-Grade | |
|---|---|
| Length | 2-12’ |
| Width | 3-1/8″ up to 9″ |
| Thickness | 3/8″ to 3/4″ |
| Source | Varied |
| Use | Siding, Paneling, and Flooring |
| Finish | Planed Old Patina Wire-Brushed, Old Patina Circle-Sawn, & Old Patina Rough-Sawn |
| FSC | 100% Certified |
| Material Specs | Nail marks with black staining are common, as are knots, checks, and small patches of discolored wood from rafters or studs. Bolt holes with black staining as well as indentations from use of tools are possible. Knots that are one quarter of the finished width are allowed; all knots are glued to prevent blow out. Note: High-Grade clear of knots is available for an additional charge. |
| Vertical Grain | |
|---|---|
| Length | 2-12’ |
| Width | 3-1/8″ up to 9″ |
| Thickness | 3/8″ to 3/4″ |
| Source | Varied |
| Use | Siding, Paneling, Flooring, and Trim |
| Finish | Planed Old Patina Wire-Brushed, Old Patina Circle-Sawn, & Old Patina Rough-Sawn |
| FSC | 100% Certified |
| Material Specs | Narrower finished widths/tighter ring counts are easier to produce. Nail marks with black staining are common. Ring count starts at 6”-rings per inch; tighter rings per inch are available upon request at an additional cost. Small 3/4” knots are allowed. Note: Clear is available for an additional charge. |
